Suggested Equipment – Instruments by Industry

WATER LEAKAGE CONTRACTOR

Our water leak location instruments are used to firstly identify leaks in water distribution networks, (pre-locate,) and then to pinpoint their position using one of our correlators and or ground microphones.

WATER COMPANY

Sewerin’s noise loggers are used to monitor water networks for early warning of water leaks. Alarms are sent via SMS or received by radio drive by. Our correlators and ground microphones are then used to pinpoint the leak’s position. Our equipment is used to save water in many countries by all the world’s major water companies.

PLUMBER

Using highly sensitive electro acoustic water leak detection instruments to listen for the water escaping from pipes or Tracer Gas, containing hydrogen and nitrogen, our equipment can help you find even the smallest of water leaks in under floor heating, boilers and cold supply systems. Using Sewerin water leak location equipment gives you the advantage of locating the water leak without causing expensive damage to floor surfaces.
Take a look at our range of Gas leak locators which are used to trace the source of flammable gas leaks on pipe networks.

Product Pages:
Variotec 8 | Aquaphon | Stethophon | Snooper mini | Ex-Tec Snooper 4 | Ex-Tec PM 4

RESTORATION

Finding the source of a water leak is very often more damaging to a building than the initial leak. Sewerin’s ground microphones and Variotec 8 Tracer gas (using a mixture of hydrogen and nitrogen) will assist you in locating the precise source of water leaks whilst minimising damage to the fabric of the building.

Product Pages:
Variotec 8 | Aquaphon | Stethophon

GAS SUPPLY Co.

Sewerin gas detection instruments are used to identify and quantify gas leaks in natural gas distribution networks. Designed to be intuitive to use for many different tasks in the gas utility industry the infrared sensors ensure accuracy and sensitivity. Our equipment is used in many countries by all the world’s major gas supply companies.

Product Pages:
Gas Equipment

GAS CONTRACTOR

Sewerin gas leak detectors are used to rapidly identify and quantify gas leaks in natural gas distribution networks. Designed to be intuitive to use for many different tasks in the maintenance and survey of gas networks there is a choice of instruments using either infrared or thermal conductivity sensors.

GAS WARNING / SAFETY

Sewerin manufacture a wide range of gas warning detectors suitable for many different gas monitoring, detection and warning applications.
Sewerin gas detectors are used to monitor and warn of the dangers from explosive, toxic and asphyxiating gases.

Product Pages:
Gas Warning Equipment

LANDFILL AND BIOGAS

Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen (O2).

Product Pages:
Landfill and Biogas

TELECOMS AND CATV

Sewerin cable locators are the ideal tool for locating and tracing telecommunication and cable television (CATV) wires and cables. Designed to be one of the easiest to use locators on the market the Sewerin UtiliTrac has a 3D view of the line being traced and numerous different locating modes to assist with locating in even the most congested cable routes.

Product Pages:
Cable and pipe location | Variotec 8

ELECTRICITY SUPPLY

Sewerin cable locators are the ideal tool for locating and tracing electricity supply cables. Offering one of the easiest to use locators on the market the Sewerin UtiliTrac has a 3D view of the power line being traced and numerous different locating modes, (single phase, three phase) to assist in power line location in even the most congested cable routes.

Product Pages:
Cable and pipe location | Variotec 8